22
Chapter 2 Installing InterPBX Communication System
4. Connecting to External Audio Source (Optional)
InterPBX Communication System supports external and internal MOH (Music
on Hold). VG5000 Voice Gateway provides a “MOH” port for connecting to the
radio or CD player. When callers are placed on hold, the system will play the
music from the radio or CD player. Please insert the plug of your music source
to the MOH port to enable this function.
You can also choose the pre-recorded audio files as the MOH on the
Blaze/Savanna Server. If you choose to use the pre-recorded audio files from
the system, do not connect the external audio source to the MOH port.
5. Connecting to External Paging Facility (Optional)
VG5000 Voice Gateway provides a “Paging” port allowing you to connect
external paging equipment for broadcasting to co-workers. Each VG5000
supports a paging port. If you have more than one VG5000, you can separate
them into different paging zones.
6. Setting Power Failure Transfer (Optional)
VG5000 Voice Gateway provides PFT (Power Failure Transfer) function. When
power failure occurs and there is no backup power, the C.O. lines connected to
port 1 will be switched to port 24. You can connect single line phones to port 24
to pick up calls. The PFT function only works on port 1 with FXO interface
supported. Port 24 can be FXO, FXS or empty ports. When power is supplied,
the PFT function is not available.
7. Prepare a Computer
Prepare a computer with web browser and be sure it is on the same subnet as of
VG5000. Change the computer’s IP settings if necessary. The suggested web
browser is Internet Explorer version 5.0 or later.
The default settings of VG5000 are as follows:
Default IP Address: 192.168.1.201:89 (The service port is 89)
Default Gateway: 192.168.1.254
Default Subnet Mask: 255
.
255
.
0
.
0
8. Login VG5000
Launch the web browser. On the address bar, enter the VG5000 default IP
address http://192.168.1.201:89 to access the VG5000.
