28
Chapter 2 Installing InterPBX Communication System
6 2
Shield/Return/Ground
Pin signals for connecting to other PBX’s T1/E1 interfaces to set a Tie
Line
RJ-48 Pin
(On T1/E1 PIC)
(Data numbering form)
RJ-48 Pin
(Data numbering form)
Signal
1 4
RX/Ring/-
<-->TX/Ring/-
2 5
RX/Tip/+
<-->TX/Tip/+
4 1
TX/Ring/-
<-->RX/Ring/-
5 2
TX/Tip/+
<-->RX/Tip/+
3 3
Shield/Return/Ground
6 6
Shield/Return/Ground
5. Launch VG6000
From your desktop, double click on DigitalGW.exe shortcut or go to
C:\DG1.00a\Setup\DigitalGW.exe to launch the program. The name of
DG1.00a folder varies in your software version. On the prompt window, input
your Blaze/Savanna Server’s (Blaze or Savanna) IP address and click the Search
button. It will take about 10 seconds to launch the program.
After you launch the program, you will see “Line Status” tab. Each line will
have its status indicator and description. Lines are gray out when not
configured. You may edit them later. When connected and properly set, line
description is in green text.
