62
Chapter 4 Gateway Configuration
1. Go to Main Menu>Gateway Configuration>Analog Gateways.
2. From the “Analog Gateway List” choose the gateway to edit then click on
the Modify button.
3. You will see the gateway type, software version running as well as the
ports that correspond to CO Line or SLT.
4. If needed, you may change in this screen the name of the gateway, MAC
address, CO Line Index Base, Jitter Buffer as well as to enable the Paging
feature. For more detailed information please see above section “Creating
Analog Gateway List”.
5. Next, you may edit the input and output volume of:
Voice Volume:
this field edits the TX Gain of the CO Line ports, or
how loud the external party hears your voice.
DTMF Volume:
this field edits the intensity of the DTMF tones in the
CO Line ports.
Input Gain:
this field edits the RX Gain of the CO Line ports, or the
volume of incoming calls.
Dial Tone Volume:
this field edits the dialing volume of the SLT ports,
or the dial tone volume of analog phones.
Configuring CO Line Ports
1. Go to Main Menu>Gateway Configuration>Analog Gateways.
2. Select a gateway from the “Analog Gateway List” and click the Port Setting
button.
3. Select a CO Line port from the “Port List” and click the Port Parameters
button to configure the settings for this port.
