Chapter 10 Multi-Server Management
161
Assigning Slave Blaze/Savanna Server
On both Master and Slave Blaze/Savanna Server, you need to assign each
system’s role so it can become the redundant server and back up each in the
event of an emergency.
1. From the Mater Blaze/Savanna Server, go to Main Menu>Multi-Server
Management>Redundant Server.
2. Select “Master” to assign this Blaze/Savanna Server as the primary server.
3. Input the Slave Blaze/Savanna Server’s Server ID.
4. Input the Slave Blaze/Savanna Server’s IP address
5. Set the timeout allowing the Slave to take over the control after this set
period. The timeout unit used is in seconds.
After the settings are complete in this section, Master will synchronize the
parameters on this InterPBX to the Slave. You then need to install the Slave
Blaze/Savanna Server and assign the Master Blaze/Savanna Server as the
redundant server.
NOTE
: The redundancy does not cover each Blaze/Savanna Server’s own
problems such as power shortage or other reasons such as Voice Gateway
problems. Regarding Power Failure Transfer feature, see Chapter 2 Installing
InterPBX/Installing VG5000 Voice Gateway.
Installing and Setting Slave Blaze/Savanna Server
