Dionex AS-HV, Operator'S Manual

Page: 83 / 122

B • Installation
Doc. 065125-01 10/06
75
B.3.11 Connecting the External Peristaltic Pump (Optional)
The external peristaltic pump kit (P/N 064508) includes the following
parts:
1. Place the pump near the AS-HV on the lab bench.
2. Remove the shorting bar from the pump, if present.
3. Connect the relay cable from the AS-HV side panel to terminals 3 and
4 on the pump’s rear panel terminal strip.
4. Connect the liquid lines as required for either the push mode (see
Figure B-13 ) or the pull mode (see Figure B-14 ).
5. When you finish the plumbing connections, go on to Section B.3.14 .
Part Number Item Quantity
064320 External peristaltic pump 1
064350 External relay cable 1
037431 10-32 to 1/16-in barbed fitting 2
043275 10-32 double-cone bolt 4
043276 Double-cone ferrule fitting 4
054410 PEEK tubing, 1.0-mm (0.040-in) ID 1.02 m
(40 in)
042627 10-32 to 10-32 coupler 2
056755 O-ring 2
053891 Dionex Reference Library CD-ROM 1