Dionex AS-HV, Operator'S Manual

Page: 26 / 122

AS-HV Operator’s Manual
18
Doc. 065125-01 10/06
ValvePosition Sets the position of the distribution valve in the syringe
pump.
WashPortDispenseSpeed* Specifies the speed at which rinse fluid is dispensed
through the sampling needle.
WasteDispenseSpeed* Specifies the speed at which liquid is directed to waste.
* There are six syringe speeds, and each speed has 10 levels. The flow rate varies,
depending on the command and the speed setting. For details, refer to the tables in
“Sampler Options Screen: Syringe Pump Version” on page 27 .
Command Function
AxpCurrentSetup Reports the AXP pump configuration and the status of
several operating parameters (read-only). To view
details, click the plus sign beside this command.
AxpState Turns the AXP pump on and off.
Flow Sets the flow rate for the AXP pump.
Pressure.LowerLimit* Sets the lower pressure limit for the AXP pump.
Pressure.UpperLimit* Sets the upper pressure limit for the AXP pump.
Pressure.Value* Reports the current AXP pump pressure (read-only).
RinseVolume Specifies the volume of rinse fluid used to wash the
sample loop, sampling needle, and sample loading
path.
* To display this command, click the plus sign beside the Pressure command.
Table 2-2. Chromeleon Commands for the AXP Pump
Command Function
Table 2-1. Chromeleon Commands for the Syringe Pump (Continued)