Dionex AS-HV, Operator'S Manual

Page: 95 / 122

C • Error Messages and Codes
Doc. 065125-01 10/06
87
PrepareNextSample can only be issued once per
program. Abort page 98
PrepareNextSample cannot be used in a manual
program. Abort page 98
PrepareNextSample may only be specified after the Inject
command. Abort page 99
Sample number error. Abort page 99
Syringe pump command overflow. Abort page 99
Syringe pump communication error->disconnect. Abort page 100
Syringe pump initialization error. Abort page 100
Syringe pump internal failure error. Abort page 101
Syringe pump invalid command. Abort page 101
Syringe pump invalid operand. Abort page 102
Syringe pump not initialized error. Abort page 100
Syringe pump plunger move not allowed. Abort page 103
Syringe pump plunger overload error. Abort page 103
Syringe pump valve overload error. Abort page 103
Theta-axis movement error. Abort page 105
Theta-axis position error. Abort page 105
The high pressure limit must be at least 100 psi higher
than the low limit. Abort page 104
The pump is not a Dionex AXP pump. Abort page 104
The sampler is busy; can’t interrupt processing now. Abort page 104
There is no pressure board present. Abort page 106
Timed move error. Abort page 106
Too many errors–device will be disconnected. Warning page 106
X-axis movement error. Abort page 105
X-axis position error. Abort page 105
Z-axis movement error. Abort page 105
Z-axis position error. Abort page 105
Alarms and Error Conditions Default Severity
Level See
Table C-1. Chromeleon Error Messages (Continued)