Dionex AS-HV, Operator'S Manual

Page: 77 / 122

B • Installation
Doc. 065125-01 10/06
69
6. Route the tubing to the right, around the sampling arm housing.
7. Using a cable tie, attach
the tubing through the
eyelet on the underside of
the housing (see
Figure B-7 ). Leave a loop
of about 10 mm (0.39 in)
in the cable tie.
Figure B-7. Attaching Tubing to the Cable Tie
Figure B-6. Installing the Sampling Needle
Sampling Needle
Mounting Block
Z-Axis Slide
Mounting Nut
Accessories Plate
Sampling Needle Guide
(P/N 064519)
PEEK Sampling Needle Kit (P/N 064511);
Sampling Needle Kit–PTFE Lined and
Sleeved (P/N 064056)
Sampling Arm
Housing
Use a cable tie to
attach the tubing
through the eyelet