Dionex AS-HV, Operator'S Manual

Page: 14 / 122

AS-HV Operator’s Manual
6
Doc. 065125-01 10/06
Power LED
The power LED lights when power to the AS-HV is turned on, and should remain
lit as long as the main power supply is operational. If the LED fails to light when
the power is turned on, refer to
Section 4.4 for troubleshooting help.
NOTE The power switch is located on the AS-HV side panel
(see Section 2.2 ).
Sample Rack
The sample rack houses the sample containers. The AS-HV is shipped with a 24-
position sample rack (P/N 064233) designed to accommodate 250 mL Nunclon
sample flasks (flasks: P/N 064053, pkg. of 50; caps and septa: P/N 064235; pkg.
of 50).
All sample container caps contain a split septum that allows the PEEK sampling
needle to pierce the cap, while also maintaining sample integrity and minimizing
sample evaporation.
Optional: A 15-position sample rack (P/N 064234) that accommodates 250 mL
narrow-mouth Nalgene® bottles (bottles: P/N 064236, pkg. of 72; caps and septa:
P/N 064232, pkg. of 72).
Rack Location Mat
The rack location mat (P/N 064250) is mounted on the spill tray. The mat houses
the sample rack and provides calibration coordinates for properly aligning the
sampling needle over a sample container.
Spill Tray
The spill tray (P/N 064251) provides secondary containment for sample
containers in the autosampler.
Standards Rack
Standards and/or samples can be loaded onto the standards rack. The AS-HV is
shipped with an 11-position standards rack (P/N 064253).
Optional: A 6-position standards rack (P/N 064252).