Dionex AS-HV, Operator'S Manual

Page: 94 / 122

AS-HV Operator’s Manual
86
Doc. 065125-01 10/06
Table C-1 lists the Chromeleon error messages and their default severity levels.
For troubleshooting assistance, refer to the page indicated in the table.
Alarms and Error Conditions Default Severity
Level See
After PrepareNextSample, no further sampler commands
are supported. Abort page 88
AS-HV configuration memory checksum error. Abort page 88
AS-HV device error->disconnect. Abort page 89
AS-HV EEPROM read error. Abort page 89
AS-HV EEPROM write error. Abort page 89
AS-HV profile length too large. Abort page 89
AS-HV program memory checksum error. Abort page 88
AS-HV RAM test error. Abort page 90
Axis initialization error. Abort page 90
AXP pump communication error->disconnect. Abort page 90
AXP pump lower pressure limit fault. Abort page 91
AXP pump motor stall fault. Warning page 91
AXP pump upper pressure limit fault. Abort page 91
Command timed out. Abort page 92
Communication error->disconnect. Error page 92
Configuration value out of range. Warning page 93
Envelope error. Abort page 93
Invalid command. Warning page 93
Invalid configuration variable. Warning page 94
Invalid number of parameters. Warning page 95
Invalid parameter or command. Warning page 95
Invalid position. Error page 96
Invalid volume. Error page 96
Missing AXP pump pressure high limit in the PGM. Abort page 96
Missing AXP pump pressure limits in the PGM. Warning page 97
Missing AXP pump pressure low limit in the PGM. Abort page 96
Parameter out of range. Warning page 97
Parameter out of range; check syringe position. Abort page 97
Please enter all parameters. Abort page 98
Table C-1. Chromeleon Error Messages