Dionex AS-HV, Operator'S Manual

Page: 35 / 122

3 • Operation and Maintenance
Doc. 065125-01 10/06
27
Sampler Options Screen: Syringe Pump Version
When the sample loading pump is the syringe pump, this screen is
displayed:
Select the Needle Height .
Select the Rinse Volume .
Select the syringe speed for the remaining parameters in the Syringe
Pump group box. There are two syringe speeds (fast and slow), and
each speed has 10 levels. The actual speed depends on multiple
factors; for details, refer to the following sections.
“Fast” Syringe Speed
The syringe operates at the “fast” speed for Aspirate Speed from
Flush Bottle and Dispense Speed to Waste Bottle (see Table 3-1) .
In the default AS-HV configuration, liquid moves through large bore
tubing during these operations. When selecting a speed setting, be
sure to take into account the tubing bore.