![background image](http://html1.mh-extra.com/html/danfoss/vlt-automationdrive-fc-361/vlt-automationdrive-fc-361_programming-manual_3731690030.webp)
0-20 Display Line 1.1 Small
Option:
Function:
[1635]
Inverter Thermal
Percentage load of the inverters.
[1636]
Inv. Nom. Current
Nominal current of the frequency
converter.
[1637]
Inv. Max. Current
Maximum current of the frequency
converter.
[1638]
SL Controller State
State of the event executed by the
control.
[1639]
Control Card Temp. Temperature of the control card.
[1644]
Speed Error [RPM]
[1645]
Motor Phase U
Current
[1646]
Motor Phase V
Current
[1647]
Motor Phase W
Current
[1648]
Speed Ref. After
Ramp [RPM]
[1650]
External Reference
Sum of the external reference as a
percentage, that is the sum of
analog/pulse/bus.
[1651]
Pulse Reference
Frequency in Hz connected to the
digital inputs (18, 19 or 32, 33).
[1652]
Feedback[Unit]
Reference value from programmed
digital inputs.
[1653]
Digi Pot Reference
[1657]
Feedback [RPM]
[1660]
Digital Input
Signal states from the 6 digital
terminals (18, 19, 27, 29, 32, and
33). There are 16 bits in total, but
only 6 of them are used. Input 18
corresponds to the far left of the
used bits. Signal low = 0; Signal
high = 1.
[1661]
Terminal 53 Switch
Setting
Setting of input terminal 54.
Current = 0; Voltage = 1.
[1662]
Analog Input 53
Actual value at input 53 either as a
reference or protection value.
[1663]
Terminal 54 Switch
Setting
Setting of input terminal 54.
Current = 0; Voltage = 1.
[1664]
Analog Input 54
Actual value at input 54 either as
reference or protection value.
[1665]
Analog Output 42
[mA]
Actual value at output 42 in mA.
Use
parameter 6-50 Terminal 42
Output
to select the value to be
shown.
[1666]
Digital Output [bin] Binary value of all digital outputs.
[1667]
Freq. Input #29
[Hz]
Actual value of the frequency
applied at terminal 29 as an
impulse input.
[1668]
Freq. Input #33
[Hz]
Actual value of the frequency
applied at terminal 33 as an
impulse input.
[1669]
Pulse Output #27
[Hz]
Actual value of impulses applied to
terminal 27 in digital output mode.
0-20 Display Line 1.1 Small
Option:
Function:
[1670]
Pulse Output #29
[Hz]
Actual value of impulses applied to
terminal 29 in digital output mode.
[1671]
Relay Output [bin]
[1672]
Counter A
Application-dependent (for
example SLC control).
[1673]
Counter B
Application-dependent (for
example SLC control).
[1675]
Analog In X30/11
Actual value at input X30/11 either
as reference or protection value.
[1676]
Analog In X30/12
Actual value at input X30/12 either
as reference or protection value.
[1677]
Analog Out X30/8
[mA]
Actual value at output X30/8 in
mA. Use
parameter 6-60 Terminal
X30/8 Output
to select the value to
be shown.
[1678]
Analog Out X45/1
[mA]
[1679]
Analog Out X45/3
[mA]
[1680]
Fieldbus CTW 1
Control word (CTW) received from
the bus master.
[1682]
Fieldbus REF 1
Main reference value sent with
control word from the bus master.
[1684]
Comm. Option STW Extended fieldbus communication
option status word.
[1685]
FC Port CTW 1
Control word (CTW) received from
the bus master.
[1686]
FC Port REF 1
Status word (STW) sent to the bus
master.
[1687]
Bus Readout
Alarm/Warning
[1690]
Alarm Word
1 or more alarms in a hex code.
[1691]
Alarm Word 2
1 or more alarms in a hex code.
[1692]
Warning Word
1 or more warnings in a hex code.
[1693]
Warning Word 2
1 or more warnings in a hex code.
[1694]
Ext. Status Word
1 or more status conditions in a
hex code.
[1695]
Ext. Status Word 2
1 or more status conditions in a
hex code.
[1697]
Alarm Word 3
1 or more alarms in a hex code.
[1698]
Warning Word 3
1 or more warnings in a hex code.
[1890]
Process PID Error
[1891]
Process PID Output
[1892]
Process PID
Clamped Output
[1893]
Process PID Gain
Scaled Output
[2117]
Ext. 1 Reference
[Unit]
[2118]
Ext. 1 Feedback
[Unit]
[2119]
Ext. 1 Output [%]
Parameter Descriptions
VLT® AutomationDrive FC 361
28
Danfoss A/S © 03/2019 All rights reserved.
MG06J202
4
4
Summary of Contents for VLT AutomationDrive FC 361
Page 2: ......