4.11 Parameters: 12-** Ethernet
4.11.1 12-0* IP Settings
12-00 IP Address Assignment
Option:
Function:
Select the IP address assignment
method.
[0]
MANUAL
IP address can be set in
parameter 12-01 IP Address
IP
Address.
[1]
DHCP
IP address is assigned via DHCP
server.
[2]
BOOTP
IP address is assigned via BOOTP
server.
[10]
*
DCP
DCP is assigned via the DCP
protocol.
[20]
From node ID
12-01 IP Address
Range:
Function:
0
*
[0 -
4294967295 ]
Configure the IP address of the
option. Read-only, if
parameter 12-00 IP Address
Assignment
is set to DHCP or
BOOTP. In POWERLINK, the IP
address follows the
parameter 12-60 Node ID
last byte
and the first part is fixed to
192.168.100 (node ID).
12-02 Subnet Mask
Range:
Function:
0
*
[0 -
4294967295]
Configure the IP subnet mask of the
option. Read-only, if
parameter 12-00 IP
Address Assignment
is set to DHCP or
BOOTP. In POWERLINK, it is fixed to
255.255.255.0.
12-03 Default Gateway
Range:
Function:
0
*
[0 -
2147483647 ]
Configure the IP default gateway of
the option. Read-only, if
parameter 12-00 IP Address
Assignment
is set to DHCP or
BOOTP. In a non-routed network,
this address is set to the IP address
of the IO Device.
12-04 DHCP Server
Range:
Function:
0
*
[0 -
2147483647 ]
Read-only. Show the IP address of
the found DHCP or BOOTP server.
12-05 Lease Expires
Range:
Function:
Size
related
*
[ 0 - 0 ]
Read-only. Show the lease time left
for the current DHCP-assigned IP
address.
12-06 Name Servers
Range:
Function:
0
*
[0 -
2147483647 ]
IP addresses of domain name
servers. Can be automatically
assigned when using DHCP.
12-07 Domain Name
Range:
Function:
0
[0 - 48 ]
Domain name of the attached
network. Can be automatically
assigned when using DHCP
network.
12-08 Host Name
Range:
Function:
0
*
[0 - 48 ]
Logical (given) name of option.
NOTICE
The display of the frequency
converter only shows the first
19 characters, but the
remaining characters are
stored in the frequency
converter. If hardware switches
are different from all ON or all
OFF, the switches have priority.
12-09 Physical Address
Range:
Function:
0
*
[0 - 17 ]
Read-only. Show the physical (MAC)
address of the option.
4.11.2 12-1* Ethernet Link Parameters
Apply to the whole parameter group.
Index [0] is used for port 1, and index [1] is used for port
2.
12-10 Link Status
Read-only. Shows the link status of the Ethernet ports.
Option:
Function:
[0]
*
No Link
[1]
Link
Parameter Descriptions
VLT® AutomationDrive FC 361
112
Danfoss A/S © 03/2019 All rights reserved.
MG06J202
4
4
Summary of Contents for VLT AutomationDrive FC 361
Page 2: ......
