0-14 Readout: Edit Set-ups / Channel
Range:
Function:
0
*
[-2147483648
- 2147483647]
View the setting of
for each
of the 4 different communication
channels. When the number is
shown as a hex number, as it is in
the LCP, each number represents 1
channel.
Numbers 1–4 represent a set-up
number; F means factory setting;
and A means active set-up. The
channels are, from right to left: LCP,
FC bus, USB, HPFB1-5.
Example: The number AAAAAA21h
means the following:
•
The frequency converter
received the setting set-up
2 via a fieldbus channel.
This selection is reflected
in
•
A user selected set-up 1
via the LCP.
•
All other channels are
using the active set-up.
4.1.3 0-2* LCP Display
Define the variables shown in the LCP.
NOTICE
For information on how to write display texts, refer to:
•
Parameter 0-37 Display Text 1
.
•
Parameter 0-38 Display Text 2
.
•
Parameter 0-39 Display Text 3
.
0-20 Display Line 1.1 Small
Option:
Function:
Select a variable for display in line
1, left position.
[0]
None
No display value selected.
[37]
Display Text 1
[38]
Display Text 2
[39]
Display Text 3
[748]
FCD Feed Forward
[953]
Profibus Warning
Word
[1500]
Operating Hours
[1501]
Running Hours
[1502]
kWh Counter
[1580]
Fan Running Hours
0-20 Display Line 1.1 Small
Option:
Function:
[1600]
Control Word
Present control word.
[1601]
Reference [Unit]
Total reference (sum of digital/
analog/preset/bus/freeze reference/
catch up and slow down) in
selected unit.
[1602]
Reference %
Total reference (sum of digital/
analog/preset/bus/freeze reference/
catch up and slow down) in
percent.
[1603]
Status Word
Present status word.
[1605]
Main Actual Value
[%]
Actual value as a percentage.
[1609]
Custom Readout
[1610]
Power [kW]
Actual power consumed by the
motor in kW.
[1611]
Power [hp]
Actual power consumed by the
motor in hp.
[1612]
Motor Voltage
Voltage supplied to the motor.
[1613]
Frequency
Motor frequency, that is the output
frequency from the frequency
converter in Hz.
[1614]
Motor current
Phase current of the motor
measured as effective value.
[1615]
Frequency [%]
Motor frequency, that is the output
frequency from the frequency
converter in percent.
[1616]
Torque [Nm]
Actual motor torque in Nm.
[1617]
*
Speed [RPM]
Speed in RPM (revolutions per
minute), that is the motor shaft
speed in closed loop.
[1618]
Motor Thermal
Thermal load on the motor,
calculated by the ETR function.
[1620]
Motor Angle
[1621]
Torque [%] High
Res.
[1622]
Torque [%]
Present motor load as a percentage
of the rated motor torque.
[1624]
Calibrated Stator
Resistance
[1630]
DC Link Voltage
DC-link voltage in the frequency
converter.
[1631]
System Temp.
[1632]
Brake Energy /s
Present brake power transferred to
an external brake resistor.
Stated as an instant value.
[1633]
Brake Energy
Average
Brake power transferred to an
external brake resistor. The mean
power is calculated continuously
for the most recent 120 s.
[1634]
Heatsink Temp.
Present heat sink temperature of
the frequency converter. The
cutout limit is 95
±
5
°
C
(203
±
9
°
F); cutting back in occurs
at 70
±
5
°
C (203
±
9
°
F).
Parameter Descriptions
Programming Guide
MG06J202
Danfoss A/S © 03/2019 All rights reserved.
27
4
4
Summary of Contents for VLT AutomationDrive FC 361
Page 2: ......
