Danfoss VLT AutomationDrive FC 361, Programming Manual

Page: 73 / 196

[42] Above
reference
high Active when actual speed is above speed
reference setting.
[43] Extended PID
Limit
[45] Bus Ctrl Controls output via bus. The state of the
output is set in
parameter 5-90 Digital &
Relay Bus Control . If a bus timeout occurs,
the output state is retained.
[46] Bus ctrl, 1 if
timeout Controls output via bus. The state of the
output is set in
parameter 5-90 Digital &
Relay Bus Control . If a bus timeout occurs,
the output state is set high (on).
[47] Bus ctrl, 0 if
timeout Controls output via bus. The state of the
output is set in
parameter 5-90 Digital &
Relay Bus Control . If a bus timeout occurs,
the output state is set low (off).
[55] Pulse output
[59] Remote,
enable,no TW
[60] Comparator 0 See parameter group 13-1* Comparators . If
comparator 0 is evaluated as true, the
output goes high. Otherwise, it is low.
[61] Comparator 1 See parameter group 13-1* Comparators . If
Comparator 1 is evaluated as true, the
output goes high. Otherwise, it is low.
[62] Comparator 2 See parameter group 13-1* Comparators . If
comparator 2 is evaluated as true, the
output goes high. Otherwise, it is low.
[63] Comparator 3 See parameter group 13-1* Comparators . If
comparator 3 is evaluated as true, the
output goes high. Otherwise, it is low.
[64] Comparator 4 See parameter group 13-1* Comparators . If
comparator 4 is evaluated as true, the
output goes high. Otherwise, it is low.
[65] Comparator 5 See parameter group 13-1* Comparators . If
comparator 5 is evaluated as true, the
output goes high. Otherwise, it is low.
[70] Logic Rule 0 See parameter group 13-4* Logic Rules . If
logic rule 0 is evaluated as true, the output
goes high. Otherwise, it is low.
[71] Logic Rule 1 See parameter group 13-4* Logic Rules . If
logic rule 1 is evaluated as true, the output
goes high. Otherwise, it is low.
[72] Logic Rule 2 See parameter group 13-4* Logic Rules . If
logic rule 2 is evaluated as true, the output
goes high. Otherwise, it is low.
[73] Logic Rule 3 See parameter group 13-4* Logic Rules . If
logic rule 3 is evaluated as true, the output
goes high. Otherwise, it is low.
[74] Logic Rule 4 See parameter group 13-4* Logic Rules . If
logic rule 4 is evaluated as true, the output
goes high. Otherwise, it is low.
[75] Logic Rule 5 See parameter group 13-4* Logic Rules . If
logic rule 5 is evaluated as true, the output
goes high. Otherwise, it is low.
[80] SL Digital
Output A See parameter 13-52 SL Controller Action .
The output goes high whenever the smart
logic action
[38] Set dig. out. A high is
executed. The output goes low whenever
the smart logic action
[32] Set dig. out. A
low is executed.
[81] SL Digital
Output B See parameter 13-52 SL Controller Action .
The input goes high whenever the smart
logic action
[39] Set dig. out. B high is
executed. The input goes low whenever
the smart logic action
[33] Set dig. out. B
low is executed.
[82] SL Digital
Output C See parameter 13-52 SL Controller Action .
The input goes high whenever the smart
logic action
[40] Set dig. out. C high is
executed. The input goes low whenever
the smart logic action
[34] Set dig. out. C
low is executed.
[83] SL Digital
Output D See parameter 13-52 SL Controller Action .
The input goes high whenever the smart
logic action
[41] Set dig. out. D high is
executed. The input goes low whenever
the smart logic action
[35] Set dig. out. D
low is executed.
[84] SL Digital
Output E See parameter 13-52 SL Controller Action .
The input goes high whenever the smart
logic action
[42] Set dig. out. E high is
executed. The input goes low whenever
the smart logic action
[36] Set dig. out. E
low is executed.
[85] SL Digital
Output F See parameter 13-52 SL Controller Action .
The input goes high whenever the smart
logic action
[43] Set dig. out. F high is
executed. The input goes low whenever
the smart logic action
[37] Set dig. out. F
low is executed.
[120] Local
reference
active
Output is high when
parameter 3-13 Reference Site = [2] Local .
Reference site set
in
parameter 3-13 R
eference Site
Local
reference
active
[120]
Remote
reference
active
[121]
Reference site:
Local
parameter 3-13 Re
ference Site
[2]
Local
1 0
Reference site:
Remote
parameter 3-13 Re
ference Site
[1]
Remote
0 1
Reference site:
Linked to Hand/
Auto
Parameter Descriptions Programming Guide
MG06J202 Danfoss A/S © 03/2019 All rights reserved. 71
4 4