8-43 PCD Read Configuration
Range:
Function:
[3422]
PCD 2 Read
from MCO
[3423]
PCD 3 Read
from MCO
[3424]
PCD 4 Read
from MCO
[3425]
PCD 5 Read
from MCO
[3426]
PCD 6 Read
from MCO
[3427]
PCD 7 Read
from MCO
[3428]
PCD 8 Read
from MCO
[3429]
PCD 9 Read
from MCO
[3430]
PCD 10 Read
from MCO
4.9.5 8-5* Digital/Bus
Parameters for configuring the control word merging.
NOTICE
These parameters are active only when
is set to
[0] Digital and control
word
.
8-50 Coasting Select
Select the trigger for the coasting function.
Option:
Function:
[0]
Digital input
A digital input triggers the coasting
function.
[1]
Bus
A serial communication port or the
fieldbus triggers the coasting
function.
[2]
Logic AND
The fieldbus/serial communication
port and a digital input trigger the
coasting function.
[3]
*
Logic OR
The fieldbus/serial communication
port or a digital input triggers the
coasting function.
8-51 Quick Stop Select
Select the trigger for the quick stop function.
Option:
Function:
[0]
Digital input
[1]
Bus
[2]
Logic AND
[3]
*
Logic OR
8-52 DC Brake Select
Select control of the DC brake via the terminals (digital input)
and/or via the fieldbus.
Option:
Function:
NOTICE
When
parameter 1-10 Motor
Construction
is set to
[1] PM
non-salient SPM
, only selection
[0] Digital input
is available.
[0]
Digital input
Activate a start command via a
digital input.
[1]
Bus
Activate a start command via the
serial communication port or
fieldbus option.
[2]
Logic AND
Activate a start command via the
fieldbus/serial communication port
and also via 1 of the digital inputs.
[3]
Logic OR
Activate a start command via the
fieldbus/serial communication port
or via 1 of the digital inputs.
8-53 Start Select
Select the trigger for the start function.
Option:
Function:
[0]
Digital input
A digital input triggers the start
function.
[1]
Bus
A serial communication port or the
fieldbus triggers the start function.
[2]
Logic AND
The fieldbus/serial communication
port and a digital input trigger the
start function.
[3]
*
Logic OR
The fieldbus/serial communication
port or a digital input triggers the
start function.
8-54 Reversing Select
Select the trigger for the reversing function.
Option:
Function:
[0]
Digital input
A digital input triggers the
reversing function.
[1]
Bus
A serial communication port or the
fieldbus triggers the reversing
function.
[2]
Logic AND
The fieldbus/serial communication
port and a digital input trigger the
reversing function.
[3]
Logic OR
The fieldbus/serial communication
port or a digital input triggers the
reversing function.
Parameter Descriptions
VLT® AutomationDrive FC 361
102
Danfoss A/S © 03/2019 All rights reserved.
MG06J202
4
4
Summary of Contents for VLT AutomationDrive FC 361
Page 2: ......
