Installation of Unit
Step 2
Tighten the four bolts that hold the sample changer to the base plate. Carefully
place the Center Middle lead piece around the sample changer slide. Install the
Left and Right Side pieces. Install the Left and Right Rear brick and secure with
the Thumb Screws. Refer to Figure 38.
Figure 38 Installing the Center, Left, and Right Shield Sections
Step 3
Install four top layer Flat Rings with the annular projections facing downward and
the flat quadrant towards the rear of the instrument. Ensure that the mounting holes
properly align after installing each layer of rings. Refer to Figure 39.
iMatic Automatic Counting System User's Manual - 9239221K
127
