Front Panel Controls
Arrow Keys
The arrow keys are located to the right of the LCD display. The arrow keys provide a
means to navigate through the menu system. These keys also allow selection of display
information during a sample count and alphanumeric characters.
Selecting Alphanumeric Characters
During the operation of the
i
Matic, there are locations where alphanumeric characters
can be entered. The procedure name, standard name, reports name, and activity units
are some of the user definable information that may require special alphanumeric
identification. Each field is initialized with factory default information that may be
modified by you to customize the system to satisfy specific requirements.
Entering an Alphanumeric Name
1.
When the text field is displayed, the cursor “_” will be located under the first
character in the field.
2.
Each character may be modified independently. To modify a particular
character, press the
Right/Left
arrow keys to position the cursor under the
character to modify.
3.
Use the
Up/Down
arrow keys to scroll through the lower case and upper case
alphabetical characters, special characters, and numerals. See Table 1.
4.
When the desired character is located, release the arrow key.
5.
Repeat this process for each character until the desired text has been displayed.
6.
Press the
Enter
key to accept.
iMatic Automatic Counting System User's Manual - 9239221K
9
