Appendix F System Installation
Remove the top and side packing materials from the shipping crates. Place the packing
materials in an out-of-the-way location, but do not discard them until after the system
is fully assembled and calibrated.
Figure 34 Removing the Shipping Bands
Installation of Unit
Mounting the System
Mount the
i
Matic following the steps below.
Note: Use proper lifting technique to avoid personal injury.
If the optional mobile cart was purchased with the instrument, then with two people,
carefully remove the system from the shipping crate and place it in the final instrument
location.
If the unit is being installed on a customer-supplied table in a mobile application, then
with two people, carefully remove the instrument from the shipping crate (by lifting
from the base plate) and place the instrument on top of the table. The base plate
must be
122
iMatic Automatic Counting System User's Manual - 9239221K
