Chapter 3 Setup Menu
Data Output Setup
The Output Setup menu is used to program the output modes and the output
configuration of the
i
Matic. The Output Modes describe the data printing, transfer to
i
Link, and automatic delete options, while the Output Configurations describe the
interfaces available and how they are used.
16 Data Output Setup
1 Data Output Modes
> 1 Manual
2 Print Line by Line
3 Print LBL/Delete
4 Print End of Group
5 Print EOG/Delete
6 Print LBL/iLink/Delete
7 Print EOG/iLink/Delete
8 iLink/Delete
2 Output Configuration
1 USB iLink/DataDump Off
2 USB iLink/DataDump On
3 RS232 Only
3 Printer Enable
1 Off
2 On
Output Modes
Eight types of output modes are available to select from.
1.
To select an Output Mode, press the
Setup
key.
2.
Using the arrow keys, position the cursor “>” to item “16” Data Output Setup
and then press the
Enter
key.
3.
Using the arrow keys, position the cursor “>” to item “1” Data Output Modes
and then press the
Enter
key. Select the desired mode as described below:
Manual Printing - Report printing is manually initiated from the Print
menu. The count data is
not
deleted from the unit’s internal memory after
printing.
Print Line by Line - The Report, as selected by the procedure, is
automatically printed one line at a time after completion of each count
record. The count data is
not
deleted from the unit’s internal memory after
printing.
70
iMatic Automatic Counting System User's Manual - 9239221K
