Define Procedure
4.
Using the arrow keys, position the cursor “>” to item “3”, Unk Sample
Diameter, and then press the
Enter
key.
5.
Enter the active diameter of the user sample in millimeters.
6.
Press the
Enter
key to accept and automatically advance to the next parameter
in the procedure. Press the
Cancel
key to return to the Define Procedure
Menu. Pressing the
Cancel
key again will bring up a “Save Changes?”
question. Select
1. No
if the change was an error or
2. Yes
to save the
change(s) made.
Select Report
The Select Report menu item allows you to select the report to be printed when
samples are counted using a procedure. Ten reports are available. Report definition is
explained in
Define Report
on page 37. Report selections are:
1 SAMPLE ACTIVITY
(pre-defined)
2 ALPHA COMPENSATED DATA (pre-defined)
3 RAW DATA
(pre-defined)
4 NCPM DATA
(pre-defined)
5 User Report
6 User Report
7 User Report
8 User Report
9 User Report
10 User Report
To select the report format for a procedure:
1.
Press the
Setup
key.
2.
Using the arrow keys position the cursor “>” to item “3” in the menu, Define
Procedure, and press the
Enter
key.
3.
Using the arrow keys, select the procedure, and then press the
Enter
key.
4.
Using the arrow keys position the cursor “>” to item “4”, Select Report, and
then press the
Enter
key.
5.
Using the arrow keys, select the desired report and then press the
Enter
key.
6.
Press the
Enter
key to accept and automatically advance to the next parameter
in the procedure. Press the
Cancel
key to return to the Define Procedure
Menu. Pressing the
Cancel
key again will bring up a “Save Changes?”
question. Select
1. No
if the change was an error or
2. Yes
to save the
change(s) made.
iMatic Automatic Counting System User's Manual - 9239221K
23
