Chapter 3 Setup Menu
Source Calibration Year
To enter the calibration year:
1.
Press the
Setup
key.
2.
Using the arrow keys, position the cursor “>” to item “7” in the menu, Define
Std Sources, and then press the
Enter
key.
3.
Using the arrow keys, position the cursor “>” to select the desired source to
edit, and then press the
Enter
key.
4.
Using the
Enter
key, advance to the Enter Year prompt.
5.
Using the arrow keys or the numeric keypad, enter the calibration year (1980
through 2079). Press the
Enter
key to accept and advance to the next question.
6.
If only the calibration year is modified, pressing the
Cancel
key will bring up
a “Save Changes?” question. Select
1. No
if the change was an error or
2.
Yes
to save the change(s) made.
Source Calibration Time
The Calibration Time menu item allows you to enter the calibration time for a source
including hours, minutes, and seconds from 00:00:00 to 23:59:59. Default time is
00:00:00.
Source Calibration Hour
To enter the hour of calibration:
1.
Press the
Setup
key.
2.
Using the arrow keys, position the cursor “>” to item “7” in the menu, Define
Std Sources, and then press the
Enter
key.
3.
Using the arrow keys, position the cursor “>” to select the desired source to
edit, and then press the
Enter
key.
4.
Using the
Enter
key, advance to the Enter Hour prompt.
5.
Using the arrow keys or the numeric keypad, enter the hour of calibration (2:00
PM is 14). Press the
Enter
key to accept and advance to the next question.
6.
If only the calibration hour is modified, pressing the Cancel key will bring up a
“Save Changes?” question. Select
1. No
if the change was an error or
2.
Yes
to save the change(s) made.
48
iMatic Automatic Counting System User's Manual - 9239221K
