Chapter 5 View Menu
5. View Menu
The function of the front panel View key depends upon the operational state of the
iMatic system. While the iMatic is idle, with no count results displayed, the View key
allows sample count data or calibration values to be reviewed.
VIEW
1 View Sample Data
Memory Status 1 of 500 used
2 View Calibration Data
Select Calibration
> 1 Calibration 1
Calibration 1
Bkg(cpm) Eff(%)
α
: 0.00 0.00
β
: 0.00 0.00
2 Calibration 2
3 Calibration 3
4 Calibration 4
5 Calibration 5
6 Calibration 6
7 Calibration 7
8 Calibration 8
9 Calibration 9
10 Calibration 10
3 View QC Data
Sample Data
The results of a completed count can be reviewed by pressing the
View
key and
selecting
View Sample Data
. The
Up
arrow key selects the first count results in
memory while the
Down
arrow key selects the last count result. The
Left/Right
arrow keys select either the previous or next count result for display. Once the desired
data record is displayed, pressing the
key causes the system to print a
single-record report using the report template selected in the procedure under which
the sample was counted. The print header for the procedure used to count the sample
will be printed (if enabled - see
Print Header
on page 44) followed by the single
record.
1.
Press the
View
key.
2.
Using the arrow keys, move the cursor “>” to item “1”, View Sample Data.
76
iMatic Automatic Counting System User's Manual - 9239221K
