Define Std Source
Source Calibration Minute
To enter the calibration minute value:
1.
Press the
Setup
key.
2.
Using the arrow keys, position the cursor “>” to item “7” in the menu, Define
Std Sources, and then press the
Enter
key.
3.
Using the arrow keys, position the cursor “>” to select the desired source to
edit, and then press the
Enter
key.
4.
Using the
Enter
key, advance to the Enter Minute prompt.
5.
Using the arrow keys or the numeric keypad, enter the calibration minute
value. Press the
Enter
key to accept and advance to the next question.
6.
If only the calibration minute is modified, pressing the Cancel key will bring
up a “Save Changes?” question. Select
1. No
if the change was an error or
2.
Yes
to save the change(s) made.
Source Calibration Second
To enter the calibration seconds value:
1.
Press the
Setup
key.
2.
Using the arrow keys, position the cursor “>” to item “7” in the menu, Define
Std Sources, and then press the
Enter
key.
3.
Using the arrow keys, position the cursor “>” to select the desired source to
edit, and then press the
Enter
key.
4.
Using the
Enter
key, advance to the Enter Second prompt.
5.
Using the arrow keys or the numeric keypad, enter the calibration seconds
value. Press the
Enter
key to accept and advance to the next question.
6.
If only the calibration second is modified, pressing the
Cancel
key will bring
up a “Save Changes?” question. Select
1. No
if the change was an error or
2.
Yes
to save the change(s) made.
iMatic Automatic Counting System User's Manual - 9239221K
49
