Chapter 3 Setup Menu
Count Time
The Count Time menu item allows you to enter the time in minutes that a sample is
counted from 0.01 to 9,999.99 minutes. The default value is 10.00 minutes.
To enter the Count Time:
1.
Press the
Setup
key.
2.
Using the arrow keys position the cursor “>” to item “3” in the menu, Define
Procedure, and then press the
Enter
key.
3.
Using the arrow keys, select the procedure, and then press the
Enter
key.
4.
Using the arrow keys, position the cursor “>” to item “5”, Count Time, and
then press the
Enter
key.
5.
Enter the desired Count Time in minutes.
6.
Press the
Enter
key to accept and automatically advance to the next parameter
in the procedure. Press the
Cancel
key to return to the Define Procedure
Menu. Pressing the
Cancel
key again will bring up a “Save Changes?”
question. Select
1. No
if the change was an error or
2. Yes
to save the
change(s) made.
Sample Iterations
The Sample Iterations menu item allows you to enter the number of times each sample
is counted. An average count value for a sample is automatically calculated and printed
if the sample iteration is set to a value greater than one. You can enter a value from 1 to
100; defaults to 1.
To enter the Sample Iterations:
1.
Press the
Setup
key.
2.
Using the arrow keys, position the cursor “>” to item “3” in the menu, Define
Procedure, and then press the
Enter
key.
3.
Using the arrow keys, select the procedure, and then press the
Enter
key.
4.
Using the arrow keys, position the cursor “>” to item “6”, Sample Iterations,
and then press the
Enter
key.
5.
Enter the desired sample iteration.
24
iMatic Automatic Counting System User's Manual - 9239221K
