Chapter 3 Setup Menu
5.
Modify the Procedure Name.
6.
Press the
Enter
key to accept and automatically advance to the next question
in the procedure definition. Press the
Cancel
key to return to the Define
Procedure Menu. Pressing the
Cancel
key again will bring up a “Save
Changes?” question. Select
1. No
if the change was an error or
2. Yes
to
save the change(s) made.
Select Calibration
The Select Calibration menu item allows you to select the calibration (choose from ten)
to be applied to this user procedure.
To select a calibration:
1.
Press the
Setup
key.
2.
Using the arrow keys, position the cursor “>” to item “3” in the menu, Define
Procedure, and then press the
Enter
key.
3.
Using the arrow keys, select the procedure, and then press the
Enter
key.
4.
Using the arrow keys position the cursor “>” to item “2”, Select Calibration,
and press the Enter key.
5.
Using the arrow keys, select the desired calibration and then press the
Enter
key.
6.
Press the
Enter
key to accept and automatically advance to the next parameter
in the procedure. Press the
Cancel
key to return to the Define Procedure
Menu. Pressing the
Cancel
key again will bring up a “Save Changes?”
question. Select
1. No
if the change was an error or
2. Yes
to save the
change(s) made.
Unk Sample Diameter
The Unknown Sample Diameter menu item allows you to enter the active diameter of a
user sample from 3.0 to 50 millimeters. The default value is 50.00 millimeters. Never
use a value greater than 50 millimeters.
To enter the active diameter of the user sample:
1.
Press the
Setup
key.
2.
Using the arrow keys position the cursor “>” to item “3” in the menu, Define
Procedure, and then press the
Enter
key.
3.
Using the arrow keys, select the procedure, and then press the
Enter
key.
22
iMatic Automatic Counting System User's Manual - 9239221K
