BOMBARDIER SEA-DOO GS 5626 1998, Shop Manual

Page: 5 / 426

III
SAFETY NOTICE 0
This manual was primarily published to be used by watercraft technicians trained by the manufactur-
er who are already familiar with all service and maintenance procedures relating to Bombardier made
Sea-Doo watercraft.
Please note that the instructions will apply only if proper hand tools and special service tools are used.
It is understood that this manual may be translated into another language. In the event of any discrepan-
cy, the English version shall prevail.
The content depicts parts and/or procedures applicable to the particular product at its time of manufac-
ture. It does not include dealer modifications, whether authorized or not by Bombardier, after manufac-
turing the product.
The use of Bombardier parts is most strongly recommended when considering replacement of any com-
ponent. Dealer and/or distributor assistance should be sought in case of doubt.
Torque wrench tightening specifications must be strictly adhered to. Locking devices (ex.: locking disk,
lock nut) must be installed or replaced with new ones, where specified. If the efficiency of a locking
device is impaired, it must be renewed.
This manual emphasizes particular information denoted by the wording and symbols:
NOTE: Indicates supplementary information needed to fully complete an instruction.
Although the mere reading of such information does not eliminate the hazard, your understanding of the
information will promote its correct use. Always use common shop safety practice.
This information relates to the preparation and use of Bombardier watercraft and has been utilized safely
and effectively by Bombardier Inc. However, Bombardier Inc. disclaims liability for all damages and/or
injuries resulting from the improper use of the contents. We strongly recommend that any services be
carried out and/or verified by a highly skilled professional technician. It is understood that certain modifi-
cations may render use of the watercraft illegal under existing federal, provincial and state regulations.
◆
WARNING
Identifies an instruction which, if not followed, could cause serious personal injury including
possibility of death.
-
CAUTION
Denotes an instruction which, if not followed, could severely damage watercraft components.
SAFETY NOTICE