BOMBARDIER SEA-DOO GS 5626 1998, Shop Manual

Page: 190 / 426

Section 06 FUEL SYSTEM
Subsection 04 (CARBURETOR)
06-04-9
Throttle Cable
Lubricate cable with BOMBARDIER LUBE lubri-
cant.
Throttle lever must reach handlebar grip without
causing strain to cable or carburetor cable bracket.
1. Must touch handlebar grip
Ensure carburetor throttle plate(s) is (are) fully open
at full throttle position. At this position, throttle le-
ver stopper is almost in contact (0.5 mm (1/64 in))
with carburetor body.
NOTE: Apply a light pressure on the throttle plate(s),
a slight play should be obtained.
To adjust, loosen jam nut then turn adjustment nut
as necessary.
717 ENGINE
1. Adjustment nut
2. Jam nut
3. Throttle lever stopper
787 ENGINE
1. Throttle lever stoppers (behind levers)
2. Adjustment nut
947 ENGINE
1. Throttle cable
2. Adjustment nut
Tighten jam nut and recheck adjustment.
After throttle cable adjustment, always proceed
with the oil injection pump cable adjustment. Re-
fer to OIL INJECTION PUMP 07-03.
-
CAUTION
Improper cable adjustment will cause strain
on cable and/or damage cable bracket or
throttle lever at handlebar.
F01K08A
1
F01G0YC
1 2 3
◆
WARNING
Make sure idle speed screw contacts stopper
when throttle lever is fully released at han-
dlebar.
-
CAUTION
Improper oil injection pump synchronization
with carburetor can cause serious engine
damage.
F01F32B
1
2
F06F0FA
1 2