BOMBARDIER SEA-DOO GS 5626 1998, Shop Manual

Page: 90 / 426

Section 04 ENGINE
Subsection 05 (TOP END)
04-05-15
– Fully thread on puller handle.
– Insert extractor spindle into the piston pin.
– Slide the sleeve and shoulder sleeve onto the
spindle.
– Screw in extracting nut with the movable ex-
tracting ring towards spindle.
1. Puller
2. Sleeve
3. Shoulder sleeve
4. Extracting nut
NOTE: The tool cutout must be positioned to-
ward the bottom of the piston.
1. Tool cutout toward bottom of piston
– Firmly hold puller and rotate handle to pull pis-
ton pin no. 4 .
– Rotate spindle until the shoulder sleeve is
flushed with the piston recess.
1. Shoulder sleeve flush with piston recess
– Loosen the extracting nut and remove puller.
– Remove the shoulder sleeve from piston.
1. Remove shoulder sleeve
– Carefully remove the piston no. 3 .
– The needles, thrust washers and the sleeve re-
main in the connecting rod bore and may be
used again.
F00B0JA
1 2 3 4
F00B0KA
1
F00B0LA
1
F00B0MA
1