BOMBARDIER SEA-DOO GS 5626 1998, Shop Manual

Page: 384 / 426

Section 13 TECHNICAL DATA
Subsection 02 (GS AND GSX LIMITED)
13-02-5
TIGHTENING TORQUES GS (5626/5844) GSX Limited (5629/5845)
ENG
INE
Exhaust manifold screw 24 N•m (17 lbf•ft) (4) 40 N•m (30lbf•ft) (4)
Magneto flywheel nut 145 N•m (107 lbf•ft) (1) 115 N•m (85 lbf•ft) (1)
Flywheel (PTO side)
110 N•m (81 lbf
•ft
) (5)
115 N•m (85 lbf•ft) (1)
Crankcase screws
M8 24 N•m (17 lbf•ft) (3) (4) 27 N•m (20 lbf•ft) (3) (4)
M10 40 N•m (30 lbf•ft) (3) (4)
Crankcase/engine support nuts 35 N•m (26 lbf•ft) (1) 25 N•m (18 lbf•ft) (1)
Engine mount/hull 25 N•m (18 lbf•ft) (1)
Cylinder head screws 24 N•m (17 lbf•ft) (1) (4) 34 N•m (25 lbf•ft) (1) (4)
Cylinder head nuts Not applicable 34 N•m (25 lbf•ft) (1)
Crankcase/cylinder screws 24 N•m (17 lbf•ft) (1) (4) Not applicable
Tuned pipe flange screws/nut 25 N•m (18 lbf•ft) (1) 40 N•m (30 lbf•ft) (1)
Tuned pipe fixation screws 25 N•m (18 lbf•ft) (1)
Flame arrester screws 10 N•m (89 lbf• in ) (1) Not applicable
Magneto housing cover screws 9 N•m (80 lbf• in ) (5)
Starter mounting screws 22 N•m (16 lbf•ft) (1) 10 N•m (89 lbf• in ) (1)
Spark plugs 24 N•m (17 lbf•ft) (5)
JE
T PUMP
Impeller 70 N•m (52 lbf•ft) (2)
Pump/hull nuts 31 N•m (23 lbf•ft) (1)
Venturi/pump housing screws 21 N•m (16 lbf•ft) (1)
VTS ring screws Not applicable 13 N•m (10 lbf•ft) (1)
Pump housing cover screws 4 N•m (35 lbf• in ) (1)
Inlet grate screws 8 N•m (71 lbf• in ) (1)
Riding plate screws 22 N•m (16 lbf•ft) (1)
S
TEERIN
G
Cable retaining block bolts 6 N•m (53 lbf• in )
Steering cable/stem arm bolt
3 N•m (26 lbf• in )
Steering stem arm bolts 6 N•m (53 lbf• in )
Handlebar clamp bolts 26 N•m (19 lbf•ft)
Steering cable ball joint (nozzle) 2 N•m (18 lbf• in ) 7 N•m (62 lbf• in )
Steering support bolts 15 N•m (11 lbf•ft) (1)
Handlebar grip screw 13 N•m (10 lbf•ft)
ADDITIONAL INFORMATION: apply where indicated; (1) Loctite 242 (blue)
(2) Loctite 271 (red)
(3) Loctite 518
(4) Synthetic grease
(5) Anti-seize lubricant
;
WARNING
Correct torques and use of Loctite must be strictly followed.