BOMBARDIER SEA-DOO GS 5626 1998, Shop Manual

Page: 125 / 426

Section 04 ENGINE
Subsection 06 (BOTTOM END)
04-06-21
11, Fitting
717 and 787 Engines
If inlet and outlet oil fittings of rotary valve shaft
have been removed from crankcase, reinstall
them with their ends pointing toward ignition
housing. Apply Loctite 518 on threads of fittings.
10, Stud
717 Engine
At assembly in crankcase, apply Loctite 518 on
stud threads. Torque to 10 N•m (88 lbf•
in ).
23, Starter Drive Bearing
947 Engine
To install bearing no. 23 of starter drive assembly,
use pusher (P/N 290 876 502) and handle (P/N 290
877 650).
1. Handle
2. Pusher
1, PTO Flywheel
787 Engine
Install O-ring onto crankshaft.
1. O-ring
717 and 787 Engine
Apply Loctite anti-seize lubricant (P/N 293 800 023)
to crankshaft threads.
Using the same tools as for disassembly proce-
dure, torque PTO flywheel to 110 N•m (81 lbf•ft).
947 Engine
Apply Loctite 242 (blue) on bolt no. 22 .
Using the same tools as for disassembly proce-
dure, torque bolt
no. 22 to 115 N•m (85 lbf•ft).
Apply Loctite 648 on mating surface of PTO fly-
wheel and coupler.
Apply Loctite 242 (blue) to Allen screws no. 21 of
coupler and torque to 23 N•m (17 lbf•ft).
F06D32A
1
2
F01D84A
1