BOMBARDIER SEA-DOO GS 5626 1998, Shop Manual

Page: 331 / 426

Section 10 STEERING SYSTEM
Subsection 04 (GS, GSX LIMITED, GTI AND GTX LIMITED)
10-04-5
1,21, Grip and Grip Insert
When installing the grip insert no. 21 in the han-
dlebar no. 22 , ensure that its notch is properly in-
serted in the hole beneath the handlebar.
Install grip no. 1 on handlebar no. 22 matching it
to the hex form on the grip insert.
Install flat washer no. 23 and screw no. 3 .
Torque screw to 13 N•m (10 lbf•ft).
Install cap no. 2 .
1. Grip insert
2. Grip
3. Flat washer
4. Screw. Torque to 13 N•m (10 lbf•ft)
5. Cap
15,16, Steering Stem Arm and Support
Position steering stem arm and support onto
steering stem.
1. Keyways
2. Integrated flat key
Replace lock nuts no. 18 by new ones.
Torque bolts no. 17 of steering stem arm to
6 N•m (53 lbf• in ).
19, Ball Joint
Secure the steering cable ball joint no. 19 to the
nozzle as per following illustrations.
GSX Limited and GTX Limited
TYPICAL
1. Ball joint on top of steering arm
2. Torque nut to 7 N•m (62 lbf•
in )
-
CAUTION
Ensure to install flat washer otherwise screw
will damage grip end.
◆
WARNING
Make sure the integrated flat keys of the
steering stem arm and support are properly
seated in steering stem keyways. Steering
stem arm must be locked in place before
torquing the bolts.
F01K1PA
1 2
3
4
5
-
CAUTION
Ensure the ball joint is parallel (± 5°) to the
nozzle arm.
F07K09A
2
1
2
F06K01A
1 2