BOMBARDIER SEA-DOO GS 5626 1998, Shop Manual

Page: 401 / 426

Section 14 WIRING DIAGRAMS
Subsection 01 (WIRING DIAGRAMS)
14-01-2
Removal
To remove the plug connector from the header as-
sembly, press both tabs and pull plug.
Step : Press tabs (both sides)
Step : Pull plug
Installation
Apply a thin coat of DEOXIT contact lubricant (P/N
293 550 015) to the pins of the header on the
MPEM only.
1. Apply a thin coat of DEOXIT contact lubricant
Each plug assembly is mechanically keyed to
mate only with identical mechanical keyed header
on the MPEM.
1. Mechanically keyed
Contact Removal
SIGNAL WIRE
Insert a screwdriver blade between the connector
and the wedge lock tab.
Release the locking tab and at the same time, pry
open the wedge lock to open position.
-
CAUTION
Do not apply lubricant excessively. Care
must be taken so that the lubricant will not
come in contact with the mating seal; the
seal may loose its sealing capacities. Do not
apply lubricant on contacts inside plug con-
nector.
F00H0NA
1
2
1
2
F00H11A
1
-
CAUTION
The wedge lock should never be removed
from the connector for insertion or removal
of the signal wire contacts
F00H12A
1