BOMBARDIER SEA-DOO GS 5626 1998, Shop Manual

Page: 66 / 426

Section 04 ENGINE
Subsection 04 (MAGNETO SYSTEM)
04-04-5
Magneto flywheel is easily freed from crankshaft
with puller (P/N 295 000 106).
Fully thread on puller in puller plate.
Tighten puller bolt and at the same time, tap on
bolt head using a hammer to release magneto fly-
wheel from its taper.
1. Puller plate
2. Puller
3. Extension handle
10, Armature Plate
Remove 3 retaining screws no. 15 and withdraw
armature plate.
7, Magneto Housing
To remove magneto housing, starter has to be re-
moved. Refer to STARTING SYSTEM 08-04.
Unscrew retaining screws no. 9 , then withdraw
housing.
4,5, Magneto Flywheel and Ring Gear
Lay magneto flywheel on a steel plate. Tap lightly
on ring gear using a hammer to release it from
magneto flywheel.
1. Magneto flywheel
11, Generating Coil
To replace generating coil:
– Heat the armature plate to 93
°
C (200
°
F) around
the screw holes to break the threadlocker
bond.
1. Heat the armature plate
– Remove screws.
– Uncrimp and unsolder BLACK/RED wire from
coil.
A00C1AA
1
2
3
F01D4CA
-
CAUTION
Protect harness from flame.
1
F01D3AA
F00D08A
1