BOMBARDIER SEA-DOO GS 5626 1998, Shop Manual, Page: 389 / 426

Section 13 TECHNICAL DATA
Subsection 03 (XP LIMITED)
13-03-5
TIGHTENING TORQUES XP Limited (5665/5667)
ENGIN
E
Exhaust manifold screw 40 N•m (30 lbf•ft) (4)
Magneto flywheel nut 115 N•m (85 lbf•ft) (1)
Flywheel (PTO side) 115 N•m (85 lbf•ft) (1)
Crankcase screws
M8 27 N•m (20 lbf•ft) (3) (4)
M10 40 N•m (30 lbf•ft) (3) (4)
Crankcase/engine support nuts 25 N•m (18 lbf•ft) (1)
Engine mount/hull 25 N•m (18 lbf•ft) (1)
Cylinder head screws 34 N•m (25 lbf•ft) (1) (4)
Cylinder head nuts 34 N•m (25 lbf•ft) (1)
Tuned pipe flange screws/nut 40 N•m (30 lbf•ft) (1)
Tuned pipe fixation screws 25 N•m (18 lbf•ft) (1)
Magneto cover screws 9 N•m (80 lbf• in ) (5)
Starter mounting screws 10 N•m (89 lbf• in ) (1)
Spark plugs 24 N•m (17 lbf•ft) (5)
JE
T PUMP
Impeller 70 N•m (52 lbf•ft) (2)
Pump/hull nuts 31 N•m (23 lbf•ft) (1)
Venturi/pump housing screws 21 N•m (16 lbf•ft) (1)
VTS ring screws 13 N•m (10 lbf•ft) (1)
Pump housing cover screws 4 N•m (35 lbf• in ) (1)
Inlet grate screws 8 N•m (71 lbf• in ) (1)
Riding plate screws 10 N•m (89 lbf• in ) (1)
STEE
R
ING
Cable retaining block bolts 6 N•m (53 lbf• in )
Steering cable/lever 3 N•m (26 lbf• in )
Steering stem arm bolts 6 N•m (53 lbf• in )
Handlebar clamp bolts 26 N•m (19 lbf•ft)
Steering cable ball joint bolt (nozzle) 7 N•m (62 lbf• in )
Steering support bolts 15 N•m (11 lbf•ft)
Lever pivot bolt 6 N•m (53 lbf• in )
Handlebar grip screw 13 N•m (10 lbf•ft)
ADDITIONAL INFORMATION: apply where indicated; (1) Loctite 242 (blue)
(2) Loctite 271 (red)
(3) Loctite 518
(4) Synthetic grease
(5) Anti-seize lubricant
;
WARNING
Correct torques and use of Loctite must be strictly followed.