BOMBARDIER SEA-DOO GS 5626 1998, Shop Manual

Page: 148 / 426

Section 04 ENGINE
Subsection 08 (EXHAUST SYSTEM)
04-08-11
Push cone no. 5 until it touches tuned pipe, then
tighten exhaust clamp no. 4 and torque to 10 N•m
(88 lbf• in ).
NOTE: Exhaust clamp nuts should be tightened
alternately to assure no leakage and to obtain
specified torque.
947 Engine
Torquing Sequence
Torque Allen screws no. 7 at tuned pipe head
flange to 25 N•m (18 lbf•ft).
NOTE: Torque nut no. 8 only to 18 N•m (13 lbf•ft)
using the polygonal key (P/N 529 035 505).
1. Torque Allen screws and nut to 25 N•m (18 lbf•ft)
Torque bolt of tuned pipe head above the engine
magneto to 25 N•m (18 lbf•ft).
1. Torque bolt to 25 N•m (18 lbf•ft)
Torque bolt of tuned pipe cone beside the engine
water return hose to 25 N•m (18 lbf•ft).
1. Torque bolt to 25 N•m (18 lbf•ft)
-
CAUTION
There must be no gap between tuned pipe
cone and tuned pipe head.
1
F06D1TA
F06D1UA
1
1
F06D1VA