BOMBARDIER SEA-DOO GS 5626 1998, Shop Manual

Page: 309 / 426

Section 09 PROPULSION SYSTEM
Subsection 04 (REVERSE SYSTEM)
09-04-9
ASSEMBLY
Assembly is essentially the reverse of disassem-
bly procedures. However, pay particular attention
to the following.
15, Spring
Make sure to properly installed spring in reverse
cable support as per following illustration.
1. Spring
11,20, Interior Lever and Shift Lever
Install the interior lever in a rotating movement.
Engage properly the interior lever tabs in the shift
lever slots.
1. Shift lever
2. Interior lever tabs
Make sure the shift lever action is smooth and
precise. Forward, neutral and reverse positions
should be easy to select with a detent position be-
tween each.
8, Spring
Make sure spring is properly installed. One end of
the spring is hooked in the pawl lock and the other
end is retained by the stopper lock nut.
1. Pawl lock
2. Spring
3. Stopper lock nut
1, Reverse Gate
When installing the reverse gate, pay attention to
position its lever behind the reverse gate support
stopper.
1. Stopper
-
CAUTION
Apply all specified torques and service prod-
ucts as per main illustration.
F07J05A
1
F07J04B
2
1
F07J06A
3
2
1
F07J07A
1