Barco MCM-50, User Manual

Page: 24 / 147

5. Physical installation and connections
To prevent battery explosion
• Danger of explosion if battery is incorrectly installed.
• Replace only with the same or equivalent type recommended by the manufacturer.
• Always replace both batteries at the same time.
• Never use an old and a new battery to together in the device.
• Disposal of used batteries must be done according to the manufacturer’s instruction.
5.2 Installing the rack mount plate
Introduction
The rack mount plate which is delivered with the MCM-50 can be mounted to enable installation in a 19” rack.
Device height is 5U.
Installing the rack mount plate
1. Remove the screws from the device.
2. Fix the rack mount plate to the device using 10 screws (reference 1 image 5-4).
1
Image 5-4
3. Use the included strip of Velcro to fi x the power supply to the cabinet (optional).
Image 5-5
20 R5909057 MCM-50 17/05/2016