Barco MCM-50, User Manual

Page: 112 / 147

11. Expert operation
Image 11-60
2. Press ENTER .
A bullet indicates the active setting.
11.3.4 Color fi ne tuning
C
AUTION
:
Color fi ne tuning may only be done by Barco trained and quali fi ed engineers.
Single channel setup
Each device is color calibrated during production. This means that devices in single channel setup need no color fi ne tuning. How-
ever to switch to a different color reproduction or color temperature, the color coordinates of the white point (W) can be changed in
the active Dynacolor set.
Multiple channel setup
In a multiple channel setup, it might be needed to match the colors amongst all devices. To do so, the color coordinates for a
common color triangle are calculated from the native (i.e. measured) color coordinates for R, G, B and W of each projector and
entered as desired coordinates in the appropriate Dynacolor set. After applying a common triangle, some
fi nal color fi ne tuning might
be required to come to a fully color matched overall image.
Fine tuning the color of the projected image
1. Check to see what Dynacolor Set is currently active: Display setup > Dynacolor > Active set : the set that has the radio button is
the active set.
2. In the OSD, navigate to the active Dynacolor set: Display setup > Dynacolor > Adjust set > Set 1... or Set 2... or .....
Image 11-61
108 R5909057 MCM-50 17/05/2016