12. Maintenance
•
device: this is the device type
-
MCM-50
•
version: indicates the version
-
two
fi
rst digit (e.g. 01): major revision;
-
second pair of digits (e.g. 20): minor revision;
-
last four digits (e.g. 0005): build number.
Necessary tools
Ethernet connection to the MCM-50
Upgrading the
fi
rmware
1. Download the latest MCM-50 software version from My.barco.com (
https://my.barco.com
).
2. Save this upgrade
fi
le on a computer which is connected to the same (local) network as the MCM-50.
3. Make sure that the MCM-50 is powered.
4. On the computer, double click the upgrade tool.
5. Enter the
IP address
or
hostname
of the MCM-50 and click
OK
.
Image 12-1
Upgrading device
6. Carefully follow the instructions to proceed.
7. During the upload of the upgrade
fi
les to the device, a progress bar is displayed.
Caution:
Do not switch off the MCM-50, nor the computer during the upgrade procedure!
Note:
In case of problems during the upgrade procedure, the following two buttons can be used for diagnostics reasons:
Save text
will save the text inside the Barco Networked Projector Upgrade Tool in a
fi
le;
Screen shot
will save a screen shot of the displayed screen at that particular time.
8. When the upgrade is successful, a green ellipse appears at the bottom of the window and an information window pops up.
9. Click
OK
to
fi
nish the upgrade.
10.Reboot the MCM-50 external warp box by doing the following:
a) Switch the MCM-50 to standby;
b) Unplug the power supply;
c) Plug in the power supply.
If the upgrade fails, a red ellipse appears at the bottom of the window and a message pops up. Restart the
procedure.
On startup of the MCM-50 after an upgrade of its software, the controller checks the software of the different
boards and modules in the MCM-50. If an old software version in one of these parts is detected, it is replaced
by the new version. During this upgrading sequence, power may be switched automatically!
12.4 Diagnostics through the OSD
Description
In the OSD, several menu items can be helpful to troubleshoot the MCM-50 or to collect some information that can be sent to Barco’s
helpdesk in case of a problem.
116
R5909057 MCM-50 17/05/2016
Summary of Contents for MCM-50
