Barco MCM-50, User Manual

Page: 115 / 147

11. Expert operation
Image 11-64
3. In the Dynacolor Set dialog box, click Calibration .
A red full screen test pattern is displayed.
4. Use a spectrometer to measure the exact x and y value and brightness of the displayed color and press ENTER to proceed.
5. In the Calibration dialog box , fi ll in the measured x and y coordinates and the Y (i.e. brightness) value.
Image 11-65
Note: The Y value is transformed to a relative L value, which implies that the physical unit is irrelevant.
6. Click Proceed .
A Green test pattern is displayed
7. Proceed in the same way for Green, Blue and White as for Red.
8. The values are fi nally updated in the Measured values of the Dynacolor set.
9. Click Default desired to copy the Measured values for Red, Green and Blue and White to the Desired values and to calculate
the secondary colors Cyan, Yellow and Magenta.
R5909057 MCM-50 17/05/2016 111