Barco MCM-50, User Manual

Page: 143 / 147

15. RCU Control
• On / Standby button : to switch MCM-50 to active state or to switch it to standby
• Pause : to switch MCM-50 to pause or resume from pause. If Pause is active, the display shows a full black image, although
MCM-50 remains in active state (not standby!).
• Freeze : to freeze/unfreeze the image
• Source selection buttons:
-
1 (RGB)
- 2 (PC)
- 3 (VIDEO)
- 4 (S-VIDEO)
- 5 (DVI)
- 7 (SDI)
These buttons can be used as shortcut keys to display a source full screen or in a window in native resolution. Pressing a
multiple times cycles through the sources connected to the same type of connector:
Example: two DVI sources are connected to the MCM-50: on to the DVI-D connector on input layer 3, the other to the DVI-D
connector on input layer 4. Pressing 5 on the RCU will launch the DVI source which is connected to the DVI-D connector of
input layer 3. Pressing 5 again, will launch the DVI source which is connected to the DVI-D connector of input layer 4. Pressing
5 again will launch the DVI source of input layer 3.
R5909057 MCM-50 17/05/2016 139