Barco MCM-50, User Manual

Page: 105 / 147

11. Expert operation
11.2.10 Moving an anchor point in large steps
Description
Edit Mode enables you to select the Position X or Position Y edit box whereas in Change Mode you can edit the value of the selected
Position X (i.e. relative movement along the X-axis; can be negative) or Position Y (i.e. relative movement along the Y-axis; can be
negative). The actions that can be performed in Edit mode and in Change mode are explained in the Help section of the Soft Edge
edit dialog.
Editing the values of Position X or Position Y
1. From the Soft Edge edit dialog, press ENTER or BACK to navigate to Edit mode .
Image 11-51
2. Use the arrows ▲ or ▼ to select the Position X or Position Y edit box.
3. Press ENTER
to navigate to Change mode .
Image 11-52
The selected ( Position X or Position Y ) edit box is highlighted.
4. Enter a new value.
11.3 Dynacolor
About this section
This section explains how Dynacolor can be used to fi ne tune the colors of the displayed image and to match the colors of multiple
devices in a display system.
Overview
• Dynacolor concept and expert use
• The Dynacolor dialog
• Enabling Dynacolor
• Color fi ne tuning
• Color calibration
• Dynacolor for In fi tec
R5909057 MCM-50 17/05/2016 101