Barco MCM-50, User Manual

Page: 125 / 147

12. Maintenance
Displaying an internal pattern
1. In the OSD, navigate to Installation > Internal patterns .
Image 12-11
2. Open the drop-down menu and select the pattern of your choice.
The selected Internal pattern disappears on exiting the Internal patterns menu.
12.8 Troubleshooting checklist
No power on MCM-50
Situation Solution
Power cord not plugged. Plug in the power cord.
LED on power supply OFF. Check power cord.
LED on power supply ON.
1. Check the connection between the power supply and the
MCM-50.
2. Check the fuse in the device.
The MCM-50 went back to its standby state
Situation Solution
Internal or external temperature is out of range.
- If the internal temperature is out of range, clean the air
grids.
- If the external temperature is out of range, cool down
the room.
Humidity is out of range. Decrease the humidity in the room.
The altitude is very high.
R5909057 MCM-50 17/05/2016 121