Barco MCM-50, User Manual

Page: 78 / 147

10. Advanced operation
Image 10-18
10.1.9 Geometry reset
Description
All geometry adjustments can be reset at once or you can decide to restore the Geometry setting to one of the modes. This can be
done from the Geometry Edit menu.
• Reset all levels : all geometry adjustments are deleted, ending up with a non distorted image where all geometry adjustment
values are 0!
• Restore to a mode : All geometry adjustments of the lower modes are reset (all geometry correction values are set to 0). The
correction values of the selected mode and all the higher modes are retained.
E.g. if you select Restore to 3x3 all adjustment values in modes 5x5, 9x9, 17x17 and 33x33 are set to 0.
Resetting all levels
1. In the OSD, navigate to Geometry > Edit > Reset > Reset all levels and press ENTER to select.
Image 10-19
2. Exit the menu.
Restoring to a mode
1. In the OSD, navigate to Geometry > Edit > Reset > Restore to 3x3 (or 5x5 or 9x9 or 17x17) and press ENTER to select.
74 R5909057 MCM-50 17/05/2016