Avtodizel ???-238??, Operating Instructions Manual, Page: 197 / 254

197
Fig. 97. Water pump disassembly:
2–impeller; 9–circlip; 10–pulley 17– remover tool nut; 18– remover
tool bolt; 19–gland seal body; 20–bushing seal; 21–sealing bushing;
22–seal complete with spring.
•
ensure the motionless bear for opposite shaft end;
•
install the impeller on the shaft in dimension of 10
-0,15
mm (fig. 96) between the shaft end face and impeller
end face. For that use at pressing the disk with diame-
ter not more 13 mm and height 10
-0,15
mm.
10 Fix the impeller 2 (or pulley 10) from rotation.
11 Screw in threaded hole of impeller 2 the plug 7 against bear.
12 Install in housing 1 the bushing 4 and rubber ring 12.