Auerswald COMpact 5000R Advanced Information Download

Page: 882 / 1388

Announcements

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 882 -

Lire depuis le système Lire

The announcements for the voice mailboxes saved in the PBX can be

saved on the PC as backup copies.
Requirements:
• At least one existing announcement for the voice mailbox
Save or play the file on the PC.

Dicter l’annonce Dicter

Announcements for voice mailboxes can directly be recorded via the

receiver of an internal phone.

Utilisateur

The phone is called.

Sub-administrator/administrator

Select the phone via the list field

Record announcement at the

subscriber

. The phone is called.

The call must be accepted and after the tone an announcemnet can be

recorded.

Rename announcement Modifier

Change the announcement name.

Delete announcement Supprimer

The announcement will be deleted.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands