Auerswald COMpact 5000R Advanced Information Download

Page: 586 / 1388

Transfert d’appel

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 586 -

Clavier

The call forwarding is controlled in the PTMP exchange line. The digit

sequence depends on the provider or router.

Installation CD

The call forwarding is controlled in the PTMP connection. Not every

provider supports this method.

2. B channel

The call forwarding is performed by the PBX during a call. It is possible for

all exchange line types but requires a free voice channel and the number

of the caller cannot be displayed unless CLIP no scrrening is used which

is not supported by many providers.

Note:

The setting

Installation CF

has priority to the setting

2. B

channel

For call forwarding via the PBX, use any available call channel

Requirements:
• Enabled call forwarding method

2. B channel

When an external phone number is forwarded, the call can be forwarded

via a call channel on any of the other ports.

Note:

A call can only be redirected via a call channel on the same port.

The probability that the call cannot be forwarded because the channels
are busy is therefore higher.

Renouveler le transfert d’appel en cas de redémarrage du système

When rebooting the PBX, the saved data of the call forwarding is

renewed.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands