manualshive.com logo in svg

Auerswald COMpact 5000R, Advanced Information, Page: 1259 / 1388

Share
Download
Auerswald COMpact 5000R Advanced Information Download Page 1259

Status Displays on the LEDs

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 1259 -

Status LED:

Power LED:

PBX status (in the case of an error):

Flashes red
(1/1 s)

Lit in red

No valid boot partition was found.
System is paused.

Flashes orange
(1/1 s)

Lit in red

In both boot partitions no constant
kernel data were found. System is
paused.

Note:

 If the 

Power

 LED remains constantly lit in red even after

a restart, an error has occured. Please contact your dealer or the
manufacturer directly.

 

Status LED:

Power LED:

PBX status (during powering

down):

Lit in green

Flashes green The delayed powering down has been

enabled and the PBX waits for the
termination of the last call.

Lit in green

Lit in red

The PBX is powered down completely.

 

LAN LED (COMpact 5000): Status of the Ethernet Interface:

Off

No Ethernet connection to a computer/
network exists.

Lit in orange

An Ethernet connection to a computer/
network exists (link).

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments