Auerswald COMpact 5000R Advanced Information Download Page 581

Page: 581 / 1388

General Info

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 581 -

Note:

After the port settings once have been made correctly, no further

changes should be made.

Source suitable for clock synchronisation

This port is used as source for the clock synchronisation and serves as

clock master for the PBX. Thus, interfering noise during calls are avoided.

Note:

Select a port a source that is synchronous to the ISDN

exchange line.

Conserver la couche 1 active de manière permanente

Requirements:
• External S

port (optional, see Technical Data in the Operating

Constructions)

An activation of the layer 1 is requested from the PBX as soon as the

layer is put into the idle state by the network provider. Thus, for example,

a delay time is avoided before the external dial tone indicates its action

readiness.

Temporisation de la langue si Setup-Ack avec Inband Info

Interfering noise during dialling phase are avoided.

Always send DTMF digit after inband info

Note:

This is a country-specific setting (only relevant in Italy).

All outstanding digits are transferred via DTMF.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands